autoid

This robustly constructed label applicator can apply labels very quickly to a variety of products.
Simply load the required labels into the gun and press the trigger to dispense a label which is
then ready to apply.

The Dynamic Label Applicator can dispense labels up to 65mm in width (any length can be
used) at 80mm per second. This means that a 50mm x 25mm (2" x 1") label can be
applied at up to 10,000 labels per hour!

Powered by a long-life, rechargeable battery and 6V motor the Dynamic Label Applicator will
automatically sense and adjust to each different label being used.

Around 1000 metres of label material can be dispensed on a single charge of the battery.

Dispensing control knob
This controls the dispensing length of the label. You simply set it to the length of he label that
you are using and the object you are labelling and the EM21 quite simply and efficiently does the
rest.

Label positioning sensor
This sensor arm monitors the leading edge of the labels and ensures that the subsequent label is
fed forward properly.

Cordless in it's design
You can use this highly productive product anywhere within your organization without the need to
be connected to mains power. One charge of the battery (left) is capable of producing an
impressive 15 rolls of labels, with each roll being 60 feet long. Alternatively this product can be
run from mains power.

Label remaining window
This handy little feature lets you see just how much is left on the roll.

Easy to set up
Match the label holder width guide, and insert the leading edge of the backing paper between the
feed roller and press roller and then turn on the power switch.
This automatically sets the label to the correct position for production.

Rechargeable battery indicator light
The EM21 has it's own power warning light, this lets you know in advance when your battery
requires charging.