autoid

The S-100 & S-200 Label Slitters

Here's the most convenient solution for slitting and rewinding narrow labels. LABELMATE Label
Slitters allow you to print small labels several across ("up") and then slit them to the desired
width. This multiplies your print efficiency by a factor equal to the number of labels across, and
dramatically increases your print head life and
ribbon usage efficiency. The rugged LABELMATE S-100 and S-200 are High-Speed,
Heavy-Duty Label Slitters identical in construction except for size.

The Slitters can be used either "in-line" or "off-line". In "in-line" use, the Slitter is placed
between the printer output and the Label Rewinder. The slitting speed is determined by the
printer output speed. In "off-line" use, the Slitter is placed between a UCAT Unwinder and a
CAT-2 Rewinder. Off-line slitting is recommended for production work or for use with three or
more blades. With slitting speeds up to 76cm/sec in "off-line" mode,
you’ll make fast work of your slitting jobs.

An optional six- (6) digit PC-1 Pre-set Counter allows you to pre-set the number of labels to
be slit. When the counter reaches the preset number, it sends a "HALT" signal to the Rewinder.
Power to the Rewinder motor is
then shut off and braking is applied. You'll have no annoying label spills to contend with.

The S-100-SP Self-Powered Label Slitter

The new S-100-SP Self-powered Label Slitter simplifies label slitting by providing powered
pinch rollers to pull the labels through the cutting blades rather than having to rely on a Label
Rewinder to pull the labels. This results in a constant cutting speed and means you can use
any LABELMATE Rewinder equipped with a "Quick-Chuck" to do your rewinding. You adjust
the slitting speed right on the S-100-SP. Because the S-100-SP is self-powered, you can
reliably use more cutting blades than on a Slitter that is powered by a Rewinder. You can add
additional BH-1 Blade Holders for a total of five across the maximum label width of 175-mm
(6.9"). The new S-100-SP is a great choice for you label needs.

The easily replaced slitting blades are click-adjustable, maximizing their useful life. Special,
very sharp, ground steel blades are supplied with the S-100, S-200 and S-100-SP and are
recommended for replacement. No tools are required for blade adjustment or replacement.
During slitting, the blades are stabilized with LABELMATE's proprietary system, giving a clean
cut at all speeds. Rugged, heavy-gauge welded steel construction and precision parts yield a
product of the highest quality.

The S-100, S-200 & S-100-SP feature a 3-Year Parts and Labour Limited Warranty, the longest
in the industry.