Label Counting Systems

Label Counting Systems

RRC330 Reel to Reel Counting Systems

 

1 2

RRC-330-STANDARD                                                                 RRC-330-U-ACH

At Auto ID Systems Ltd we supply a range of Label Counting Systems from the Labelmate range.

The RRC-330 Reel-to-Reel Counting System brings you new convenience in a self-contained table-top Label Counting System using a pre-set counter. The RRC-330 accepts rolls with a maximum size of 330mm. The optional built-in encoder allows length measurement and offers direct read-out in Metric or British & American Units.

RRC-330: Accepts roll with a maximum outer diameter of 330mm. Take-up shaft is available both in Standard and Adjustable Core Holder. The Standard take-up shaft is available is 38, 40, 44, 50, 70, 76 and 100mm. The ACH (Adjustable Core Holder) accepts cores from 25 to 101mm. The supply core is supplied in both 40mm and 76mm (other core diameters available on-demand).

The RRC-330-U Universal Reel-to-Reel Counting System

The new RRC-330-U Universal Reel-to-Reel Counting System uses a state of the art ultrasonic fork detector that allows the RRC-330-U to count almost any type of labels, including transparent or black labels. The ultrasonic detector detects the labels by sensing the difference in thickness between the backing paper and the backing paper plus label.

RRC-330-U: Accepts roll with a maximum outer diameter of 330mm. Take-up core is available both in Standard and Adjustable Core Holder. The Standard take-up shaft is available is 38, 40, 44, 50, 70 and 76mm. The ACH (Adjustable Core Holder) accepts cores from 25 to 101mm. The supply core is supplied in both 40mm and 76mm (other core diameters available on-demand).

The COUNT-100 and COUNT-200 Counters can count up or count up to a preset count as you wish. If desired, when the pre-set count is reached, the COUNT-100 and COUNT-200 can send a “HALT” signal to the CAT-3 Rewinder, causing it to stop.

The counter sensor itself is a state-of-the-art infra-red transmitting device that shines through the label web and detects the gap between successive labels. There is a sensitivity control to adjust for different kinds of label webs.

COUNT-100-U Universal Counter

The new
COUNT-100-U Universal Counter uses a state of the art ultrasonic fork detector that allows the COUNT-100-U to count almost any type of labels, including transparent or dark labels. The ultrasonic detector detects the labels by sensing the difference in thickness between the backing paper and the backing paper plus label.

COUNT-100 COUNT-100-U

COUNT – 100                                                                   COUNT -100-U

If you need more advice on our Label Counting Systems, email or call Steve  on 01704 876241.