Label Slitters - Auto ID Systems

				\|Home Page \|Email Us\|Brochure\|

Dispensers - Hand
Dispensers - Semi Automatic
Applicators - Hand
Applicators - Semi Automatic
Applicators - Fully Automatic
Print and Apply
Special Applications
Rewinders
Label Counters
Unwinders
Slitters
Quick Chucks
Label Printers

Label Printing Bureau
Label Print Repair Service

Label Supplies
Thermal Transfer Ribbons
Printer replacement Heads
Print Head Cleaning Kits

Email us
Request a brochure
Download Data Sheets

LABELMATE Label Slitters allow you to print small labels several across ("up") and then slit them to the desired width. This multiplies your print efficiency by a factor equal to the number of labels across, and dramatically increases the life and efficiency of your print head and ribbons.

The LABELMATE Models S-100 and S-200 are rugged High-Speed, Heavy-Duty Label Slitters that require no power themselves. They are designed to be used with the LABELMATE CAT-2 Label Rewinder and, for the highest efficiency off-line use, with a Label Unwinder. The CAT-2 Label Rewinder does the work as it pulls the label web through the cutting blades.

The Model S-100 Heavy-Duty Label Slitter includes 2-blades. It is shown here with the optional Preset Counter PC-1. Slitters can be used in either "in-line" or in an "off-line" mode. In "in-line" use, the Slitter is positioned between the printer output and a LABELMATE CAT-2 Label Rewinder. The slitting speed is determined by the printer output speed. In "off-line" use, the Slitter is used with a LABELMATE Unwinder and a CAT-2 Rewinder to achieve maximum slitting convenience and throughput. With slitting speeds up to 30-inches per second in "off-line" mode, you’ll make fast work of big slitting jobs. Off-line slitting is recommended for production operations or for three or more blades because of easier set-up than in-line slitting.

An optional 6-digit Pre-set Label Counter (PC-1) allows you to set the number of labels to be slit. When the counter reaches your preset number, it sends a "HALT" signal to the LABELMATE CAT-2 Label Rewinder. Power to the CAT-2 rewind motor is then disconnected and braking is applied. You’ll have no more annoying label spills to contend with.

For wider labels choose the S-200 Slitter that handles label webs up to 9.5-inches wide. The optional PC-1 Counter is also available on the S-200. Both Slitters use easily-replaced snap-off slitting blades that are click-adjustable so they can be used over most of their length, extending their useful life. No tools are required for blade adjustment or replacement. During the slitting operation, the blades are stabilized with LABELMATE's proprietary system, giving a precise cut at all speeds. Rugged, welded, heavy-gauge steel construction and precision parts yield a product of the highest quality. Put a LABELMATE Heavy-Duty Label Slitter to work for you, today!

New! COMPLETE "OFF-LINE" LABEL SLITTING STATIONS

LABELMATE's new "Off-Line" Slitting Stations provide the most convenient and cost-effective slitting solution. You get all the items you need to slit label rolls with labels printed several across or "up." Available in standard and "DELUXE" configurations, the Slitting Station Packages offer you an affordable and easy-to-use system with solid, durable construction. As with all LABELMATE Slitters, cutting blade position is infinitely adjustable and, once locked in, stable, thanks to LABELMATE's proprietary Blade Stabilization System.

The SLIT-100 Off-Line Slitting Station is shown left.

S 100 Slitter

Click here for larger picture

S 200 Slitter

Click here for larger picture

Label Slitter station

Click here for larger picture

COMPLETE OFFLINE SLITTING STATIONS

Specifications

MODEL

INCLUDES ALL YOU NEED EXCEPT LABELS & CORES

WIDTH

SPEED

SLIT-100

UCAT-S Heavy-Duty Label Unwinder;

S-100 Heavy-Duty Label Slitter;

Heavy-Duty Rewinder;

Blade Holders with Blades;

Aluminum and 2 Thin Plastic Separator Plates;

Locking Bar to lock units together in position;

High Speed Replacement Blades (10).

Up to 4.5"

(114+mm)

Up to 30 ips (inches per second)

SLIT-100 "DELUXE"

Upgraded SLIT-100 with a second CAT-2 Heavy-Duty Rewinder used as variable tension control Unwinder in place of the UCAT-S. Provides the ultimate rewind tension control.

Up to 4.5"

Up to 30 ips (inches per second)

SLIT-200

UCAT-1-W9 Heavy-Duty Label Unwinder;

S-200 Heavy-Duty Label Slitter;CAT-2-W9 Heavy-Duty Rewinder with extra Wide Fins;

3 Blade Holders with Blades;

Aluminum and 3 Thin Plastic Separator Plates;

Locking Bar to lock units together in position;

High Speed Replacement Blades (10).

U p to 9.5”

(241mm)

Up to 30 ips

SLIT-200 "DELUXE"

Upgraded SLIT-200 with a second CAT-2-W9 Heavy-Duty Rewinder used as variable tension control Unwinder in place of the UCAT-1-W9. Provides the ultimate rewind tension control.

Up to 5"

Up to 30 ips

INDIVIDUAL LABEL SLITTER & ACCESSORIES

MODEL	DESCRIPTION	LABEL WIDTH	NOTES	SPEED
S-100	Heavy-Duty Label Slitter. Requires CAT-2 Rewinder. Recommended: CAT-2-CHUCK Rewinder.	Up to 6.5"	with 2 Blade Holders	Up to 30 ips (inches per second)
S-200	Wide Heavy-Duty Label Slitter. Requires CAT-2-W9 Rewinder and 5.5"-FINS.	Up to 10"	with 3 Blade Holders	Up to 30 ips
5.5"-FINS	Set of three 5.5" wide Fins (Vanes) for CAT-2 or CAT-2-W9 Rewinders to hold multiple narrow label cores when rewinding after slitting. For 3" dia. cores.	(Previously called VANE-5.5)	Replace or use with standard 2.75" wide Fins	N/A
BH-1	Additional Blade Holder Assembly. Includes Precision High-Speed Blade.	-	For S-100, S-200	N/A
HSB-10	10 Precision High-Speed Blades for Slitters.	-	Replacement
PC-1	Optional preset counter counts label batch size. Stops Rewinder automatically when job is finished.	Any	For S-100, S-200	N/A

MODEL	ADD OPTION	DESCRIPTION	MODEL	ADD OPTION	DESCRIPTION
SP (Aluminum Label Separator Plates)	-3INCH	8.6" dia. for 3" cores	SPP (Thin Plastic Separator Plates)	-3INCH	8.6" dia. for 3" cores
	-3INCH-12	12" dia. for 3" cores		-ACH	8.6" dia for ACH-1
	-ACH	8.6" dia. for ACH-1		-1INCH	8.6" dia. for 1" cores
	-1INCH	8.6" dia. for 1" cores		-1.5INCH	8.6" dia. for 1.5" cores
	-1.5INCH	8.6" dia. for 1.5" cores		-40MM	8.6" dia. for 40 mm cores
	-40MM	8.6" dia. for 40 mm cores		-70MM	8.6" dia. for 70 mm cores
	-70MM	8.6" dia. for 70 mm cores

Some Slitter Details: S-100 and S-200

Size: HxWxD 12x12x12-inches (305x305x305mm). 15x15x15-inches (381x381x381mm).

Web Width: Up to 6-inches (165mm). Up to 10-inches (254 mm).

Number of blades: 2 included. 3 included. Recommended maximum number of blades is 5.

Speed: Same as the printer speed for in-line use. Up to 30-ips (80cm/sec) in off-line use.

Power: No power is required for the S-100 or S-200 itself.

Blade Holders: Extra Blade Holders (Model BH-1) are field installable. Blade included. Replacement blades are available at any hardware store, or order LABELMATE HSB-10 Precision Ground High Speed Replacement Blades for longest life and sharpest cut.

Optional: PC-1 Six- (6) digit Pre-set Counter to set batch size. Specify 120vac 60 Hz or 230vac 50Hz power.

Optional: 5.5" Wide Vanes to support multiple narrow cores on your CAT-2 Rewinder. Order VANE5.5.

Optional: Separator Plates for your Rewinder. Keeps slit labels from interleaving or sticking together. You need one Separator Plate for each Blade on your Slitter. Order SP-3-INCH for 3" cores, Order SP-ACH for use with the Adjustable Core Holder ACH-1. Also available in thin plastic to minimize width build-up between rewind cores. Order SPP-3-INCH & SPP-ACH.

Optional: High Speed Replacement Cutting Blades. 10 very sharp blades in a convenient dispenser. Order HSB-10.

Warranty: 3-year Parts and Labour Limited Warranty, the longest in the industry. One-year Warranty on PC-1 Pre-Set Counter and its included Power Supply Module.

label printerslabel dispenserslabel applicatorslabel rewindersdata capture systemsbarcode labelsbar code labelsbar codesautomatic identification systems