The Twin-CAT-2 is a fast and easy way to deliver label rolls the way you want them.
With two motors and your choice of core holders, you have maximum versatility in setting up the operation you need. Both spindles can rewind, unwind and be controlled (direction and torque) independently.
P/N: LMR016 – BASE UNIT (without any core holder)
To choose the Core Holder, pick two from the list below. (Mix or Match)
LMX460 1-INCH CORE HOLDER 25.4mm standard shaft and flanges 155mm Width 2 flanges
LMX461 STANDARD CORE HOLDER Standard Shaft with vanes and flanges. Specify 38, 40, 44, 70, 46 or 100 mm 155mm width 2 flanges
LMX462 10-INCHES CORE HOLDER Shaft with vanes in 255mm lenght. Specify 38, 40, 44, 70, 46 or 100 mm 255mm width 2 flanges
LMX463 ACH-TWIN* Adjustable core holder shaft for cores from 25mm to 101mm 155mm width 1 flange
LMX464 CHUCK C-76170 Quick-Chuck shaft in 170mm lenght and inner flange. Specify 38, 40, 44, 70, 76 or 100mm 170mm width 1 flange
LMX465 CHUCK C-76220 Quick-Chuck shaft in 220mm lenght and inner flange. Specify 38, 40, 44, 70, 76 or 100mm 220mm width 1 flange
LMX466 CHUCK C-76270 Quick-Chuck shaft in 76mm core diameter and 170mm lenght and flange 270mm width 1 flange
LMX467 CHUCK C-100170 Quick-Chuck shaft in 100mm core diameter and 170mm lenght and inner flange 170mm width 1 flange
LMX468 CHUCK C-100220 Quick-Chuck shaft in 100mm core diameter and 220mm lenght and inner flange 220mm width 1 flange
LMX469 CHUCK C-100270 Quick-Chuck shaft in 100mm core diameter and 270mm lenght and inner flange 270mm width 1 flange
*The ACH-TWIN core holder cannot be mixed with another type.